Pump unit

With a weight less than 3kg and its fully adjustable low pulsation flow it the simplest and most reliable couplant pump on the market.
H_pump_GE

simple

The PUMP Unit is set up in seconds and easy to operate. Simply connect power cable and couplant piping and switch on the unit.

no pulsation

For almost every Ultrasonic application it is crucial to have steady couplant flow. This pump Unit is specially designed to do exactly this: pulsation free couplant supply.

robust

Designed for the use in harsh field service environments the PUMP Unit comes with an exchangeable filter and IP 65 protection rating.

PUMP UNIT

The main task of the pumpUnit is to provide a continuous, low-noise and adjustable feed of couplant liquid for ultrasound inspection. Due to its protection rating of IP65 it can be operated inside as well as outdoors in harsh environments.

R_pump

Key features

  • Adjustable flow rate
  • Replaceable particle filter
  • Ability to suck liquid from reservoirs lower than the pump itself, even when the tube and pump is filled with air
  • Pump against a pressure up to 3 bar

 

 

 

 

Want to learn more? 

Contact Us Now

RELATED PRODUCTS & SERVICES

Inspection Robotics empowers you with total automated inspection solutions tailored to your desired outcomes. Our advanced technology and service solutions deliver industry-leading value to your assets.

PALM Scanner

The Inspection Robotics PALM Scanner is a compact, lightweight and robust tool that uses ultrasonic phased array technology to reliably, efficiently and safely inspect the weld integrity of small diameter tube racks with clearance as narrow as 12 mm. see it in action   get brochure fast & easy setup The set up time for LEARN MORE →

eMCU

The Inspection Robotics eMCU is a compact, light and robust system for reliable motor control, featuring integrated position slip compensation. View Product Specifications The eMCU motor control unit supports flexible and accurate scanning processes through delivering closed loop servo-motor motion-control. With a weight of less than 5kg (<11lb) the eMCU is the lightest motor controller LEARN MORE →

PALM flat

The PALM Flat is a compact, lightweight and robust tool that uses ultrasonic phased array technology to inspect the weld integrity of large diameter pipes up to flat surfaces. see it in action fast & easy setup The set up time for an inspection is less than one minute. The PALM flat comes in one LEARN MORE →

PUMP Unit

With a weight less than 3kg and its fully adjustable low pulsation flow it the simplest and most reliable couplant pump on the market. View Product Specifications simple The PUMP Unit is set up in seconds and easy to operate. Simply connect power cable and couplant piping and switch on the unit. no pulsation For LEARN MORE →

Gas Detection and Safety System

When using remote inspection robots in confined spaces such as pressure vessels where there is a risk of an explosive atmosphere, safe operation can always be achieved by ensuring that the atmosphere is permanently monitored and devices are unpowered immediately. Gas detection and safety system Our robotic platforms can equipped with a suction tube which LEARN MORE →

FAST UT

The solution for automated remote Ultrasonic & Phased Array inspection on pipes & drums. Whether you are looking at corrosion mapping or weld inspection – with the modular FAST UT you have a modular inspection system. See it in action corrosion mapping Due to its modular design the FAST platform can be adapted to new applications LEARN MORE →

Encoder Modules

High resolution (up to 4096 cts / rev), exchangeable connectors and miniature design distinguish the Inspection Robotics encoder suite from the competition. View Product Specifications robust The basis of our encoder suite is a rotating magnet which is not harmed by water or dust ingression. The standard is IP54, can be increased on request. safe LEARN MORE →

Blade Root Scanner

This innovative scanner is using Phased Array (PA) technology to inspect the blade roots for flaws of all kind. The inspection can be performed in-situ, without the need of opening the machine and dismantling the blades. see it in action time saving The scanner is designed for Phased Array in-situ inspections. Performing the blade root LEARN MORE →

Bore Scanner

The BS2 – Bore Scanner is the second generation of the Inspection Robotics Bore Scanner; It can perform UT and ET simultaneously and covers bore diameters range from 70mm up to 300mm. See it in action advanced NDT Performing Ultrasonic and Eddy Current inspection at the same time reduces the inspection time by 50%. By LEARN MORE →

BWCI – Boiler Wall Cleaning & Inspection

A cleaning and Inspection robot for boiler walls, our biggest robot eliminates the need for scaffolding in boilers. It cleans and inspects the boiler tubes in parallel. See it in action   get brochure time saving Looking at the big picture the time & cost saving using a robotic cleaning and inspection solution is tremendous. LEARN MORE →

 

PRODUCT SPECIFICATIONS

Electronic PUMP
Dimensions (L x B x H) 202 x 215 x 80 mm
Weight 2.63 kg
Protection rating IP65
Storage Temperature -20 … +70°C
Operation Temperature -10 … 50°C (environment and liquid)
operation voltage 100 … 240 V AC, 50/60 Hz
power consumption < 100 W
liquids water, low viscous oils
flow rate 0.05 … 1.3 l/min (water)
max pressure 3.7 bar (water)
M_pump_spec

Want to learn more? 

Contact Us Now